There are a few other helpful options in the Preferences. To find Ecamm Live’s Preferences, choose Preferences from the Ecamm Live menu at the top of the screen beside the menu.
Play App Sounds
Ecamm Live will play a sound when comments arrive. Viewers may hear the sounds if you use speakers during the broadcast, while Ecamm Live’s echo cancellation feature is deactivated.
Show Animated Reactions
Ecamm Live will display floating Emoji symbols in the Comments & Reactions window when reactions arrive.
Show Program Window While In Other Apps
While you’re live or recording, if you switch to another app, a small floating control window will be displayed. This control window allows you to see what’s being broadcast, and includes buttons to change Scenes and Source modes, as well as a Finish button.
Keep Utility Windows In Front While Live
While broadcasting or recording, the control windows such as the Scenes window and Overlays window will always remain visible above all other windows, even when in another app.
Clicking Utility Windows Brings Ecamm Live To The Foreground
By default, when Ecamm Live is not the active application, clicking an Ecamm utility window will not activate the app. Check this box if you want this to activate the app (bringing it to the foreground.)
Automatic Overlay Alignment
Automatic Overlay Alignment aligns overlays to other overlays as they are positioned or resized. Choose None to turn off this feature. Pick Sticky for the default behavior, which will cause overlays to stick other overlays when they are aligned. Choose Snappy if you want overlays to snap into alignment as they near each other. Hold down the command key to temporarily disable alignment.
When Returning To Live Mode With Unpublished Changes
What to do if changes have been made to the current scene while in Preview mode and you are returning to Live mode.
Automatically Hide Comment Overlays
When a viewer comment is added as an overlay, use this setting to automatically hide it after a given number of seconds. When this setting is activating, the overlays will also be hidden automatically after changing Scenes.
Show Skype’s Active Speaker Camera
When on a Skype call with more than one guest, Skype can offer a camera source what shows the person who is currently speaking.
Use Discrete Graphics Card for Main Screen
Intel-based 15-inch and 16-inch MacBook Pros come equipped with dual graphics, meaning they have a more powerful graphics card (known as the discrete graphics card) in addition to the card built into the Mac’s motherboard. The Mac will switch automatically between the two GPUs based on a variety of settings. Check this checkbox to ensure that the discrete graphics card is used for the main screen when Ecamm Live is open.
Using the discrete graphics card will result in better performance, especially at higher frame sizes. However it can generate additional heat, resulting in computer fan noise.
Your Ecamm Live account is what you use to identify yourself and your Ecamm Live subscription. Click Manage Account to change your name, email address or password.
If you have an active Ecamm Live subscription, you’ll see a Manage Billing button. Click this to update your billing information, view, download and print invoices, or cancel your subscription.
Choose from 540p, 720p, 1080p, 1440p or 4K. This setting will apply to both the resolution of your live stream and the resolution of local recordings.
1440p and 4K are only available with an Ecamm Live Pro subscription.
Facebook’s standard livestream size is 720p. You may wish to choose the smaller option if your internet connection’s upload speed is insufficient for 720p.
While Facebook will accept up to a 4K video stream, it does not currently offer the ability to view a stream at this resolution. Other streaming destinations such as YouTube fully support 4K live broadcasts.
The stream size cannot be changed during a broadcast.
Note that higher stream sizes will require a faster internet connection.
When selecting a stream size, Ecamm Live will automatically run any connected cameras at the ideal resolution if supported. For example, selecting 1080p will automatically run any connected Logitech webcam at 1080p. However a webcam that does not support 1080p will continue to run at 720p.
Choose from Wide (16x9), Extra Wide (2x1), Classic (4x3), Square, and Tall (9x16), or choose the Aspect ratio of your Mac’s display. The last option allows you to use 360° Cameras.
9x16 is like a mobile display held in portrait orientation. 16x9 is like an HDTV screen, and 4x3 is like standard definition televisions before HD.
The stream shape cannot be changed during a broadcast.
Choose from 24, 25, 30, 50 and 60 frames per second. This setting will apply to both the resolution of your live stream and the resolution of local recordings.
Most users will not need to change this from the default frame rate of 30 FPS. However non-US users may wish to record in 24 or 25 FPS mode. Higher frame rates such as 60 FPS are common for game streaming. Note however that using 50 or 60 FPS mode will double your internet bandwidth requirements.
When selecting a frame rate, Ecamm Live will automatically run any connected cameras at the this frame rate if supported. For example, selecting 24 FPS will automatically run any connected Logitech webcam at 24 FPS. However a webcam that does not support 24 FPS will continue to run at 30 FPS.
Use High Quality Video
Ecamm Live streams at a bit rate that balances the amount of data we send over the internet and the visual clarity of your video. If you want to broadcast in higher bit rate, and your upload speed is fast enough, you can select this option. During a broadcast, you can turn change this setting by clicking the HD button at the top of the main window.
This will require a sustained minimum of 4 Mbps (megabits per second) for your internet upload speed when using a 720p stream size. If at any point your connection cannot sustain this, Ecamm will automatically reduce the bit rate so that the broadcast may continue.
Use High Quality Audio
In most cases, Ecamm Live’s default audio bitrate is sufficient. However, some broadcasters such as musicians, may wish to increase the audio bitrate by enabling this option. This option cannot be changed during a broadcast.
Recording File Format
Select the format for Ecamm Live’s local recordings. The default is .MOV format, however some services may prefer a .MP4 file instead. Note that the actual video and audio data in the file will be the same H.264 and AAC format for these options. (Only the container format changes.)
Choose a visual effect when changing Source Modes or Scenes. Select No Transition, Cross Dissolve, Slow Cross Dissolve, Slower Cross Dissolve, White Flash, Swipe, Cross Zoom, Light Rays, Ripple and Copy Machine transition effects. A Pro-level plan is required for Cross Zoom, Light Rays, Ripple and Copy Machine effects.
This transition effect can also be set on a per-Scene basis by selecting a transition in the Scene Optons section of the Options menu.
Fade Out When Finished
When this option is enabled, Ecamm Live’s video stream will fade to black when the Finish button is clicked.
Auto-Play Video Files
When this option is enabled, Ecamm Live’s Video File source mode will begin playback automatically when a video file is picked, when Video File source mode is entered, or when a broadcast or recording starts while in Video File source mode. When thich option is disabled, you’ll need to press the play button or press the spacebar to start video playback.
Show Picture-in-Picture Above Overlays
When this option is enabled, your picture-in-picture window will show up on top of any overlays. This is particularly useful when presenting a full screen image or PDF overlay while using picture-in-picture.
Show Picture-in-Picture in New Video File and Screensharing Scenes
The default picture-in-picture visibility setting for newly created Scenes.
Show NDI Titles Full Screen
Disable Built-in Camera
You may wish to completely disable the built-in camera to avoid it from being picked accidentally when using other cameras.
Use Echo Cancellation
Use this checkbox to toggle Echo Cancellation.
Enable Echo Cancellation for External Speakers
Ecamm Live will automatically disable Echo Cancellation if it detects that the Mac’s internal speakers are not being used. Pick this checkbox if you’re using external computer speakers that are not headphones and you require Echo Cancellation.
Broadcast System Audio
By default, Ecamm Live will broadcast your Mac’s system audio when in Screenshare mode. Change this setting to either never broadcast system audio, or to broadcast system audio all the time.
Automatically Mute Microphone During Video Playback
By default, the microphone will be muted when in video playback mode with no picture-in-picture. Uncheck this checkbox to turn off auto-mute.
In most cases, audio and video arrive from input sources more or less simultaneously. However some video sources my have latency introduced by a slow encoder, causing audio and video that aren’t synced up. (One example of this would be video arriving from an encoder such as an Elgato Cam Link 4K, with audio arriving from a difference source such as a USB microphone.)
In this case, you may wish to add a slight delay to your audio input. Adjust the Mic Delay slider to add an audio delay. But don’t forget to put it back when a delay is no longer needed!
Map Input Channels 1 And 2 To Left And Right Stereo
By default, Ecamm Live will mix all of an input device’s channels together. However, if you are using a stereo audio input, such as a stereo microphone, you may wish to map channels 1 and 2 to left and right stereo.
Screen Sharing Preferences
Include Desktop Icons
Show the desktop ions when sharing the entire screen.
Include Desktop Picture
Show the desktop image when sharing the screen. Turn this off to use a black background instead.
Add Margin When Zooming to an App Window
Add a small margin around windows when automatically zooming to an app or app window.
Optimize for Better Quality or Higher Frame Rate
When using the Better Quality setting, you may notice a reduced screen capture frame rate when sharing movie playback in a browser. To prevent this, use the Higher Frame Rate setting.
Include Mouse Cursor
Include the mouse cursor in the broadcast. Note that the mouse cursor is automatically hidden when Ecamm Live is the active application.
Mouse Cursor Size
Select a custom mouse cursor size.
Show Mouse Clicks
Mouse clicks will be indicated with a small circle around the mouse cursor.
Show Everything When Sharing The Entire Screen
Share the screen contents with no changes. This mode will include Ecamm Live in the broadcast, and will not hide the desktop or desktop icons. However, this mode is more efficient, and ideal for sharing a second display.
Ecamm Live provides four triggers for macOS Shortcuts:
Ecamm Live Opens
Assign a shortcut to run when the Ecamm Live app opens. For example this could turn on studio lights.
Assign a shortcut to run when a broadcast or recording starts. For example, activate Do Not Disturb mode, quit certain apps, or turn on an On-Air light in your studio.
Assign a shortcut to run when a recording or broadcast finished. For example, deactivate Do Not Disturb mode. This trigger will send the recorded file’s path into the Shortcut.
Ecamm Live Quits
Assign a shortcut to run when Ecamm Live quits.